"The Miracle in a Bottle for Fastener Removal"

 

Marketplace

MIL-4-81294D Paragraph 4.6.4.3.1 Notched C-Ring Page

SMI Inc.

SCIENTIFIC MATERIAL INTERNATIONAL

 


12219 SW 131 Avenue Miami, Florida 33186-6401 USA

Phone (305)971-7047 Facsimile (305) 971-7048

Attn: Larry Holt Date: 02-Oct-1995
Holt International LLC
1060 Yaple Rd. SMI/REF: 9509036-R
Kingston, OH 45644 Reissued for name change only.

Product: E-Z Grip (Marine Formula) (rec'd 13-Sep-1995)

Dilution: As received (well shaken before use)

 


MIL-R-81294D

Paragraph 4.6.4.3.1

Notched C-Ring

 


          1. Notched C-Ring
            1. Procedure. The ring shall be stressed to 65 percent of the predetermined average breaking strength by tightening the nut until the diameter of the ring, measured across the bolt, is reduced to the calculated value. (In most cases the diameter will be reduced by 0.22 cm (0.087 inch)). Any steel bolt of suitable size may be used for the stressing. If equipment is available, this may be done more accurately with a strain indicator and a loading bolt containing a strain gauge. The stressed ring shall be immersed for 60 seconds in the paint remover sample with the notched side down to a point where the ring is covered approximately one inch on either side of the notch. The rings shall be removed and allowed to hang notched side down in air for 100+/- hours. No rinse of any kind shall be used after dipping. Suitable hangers may be made of plastic or rubber coated wire. The rings shall not break or crack during the 100 hour test period.

Result: Conforms

Respectfully sumbitted,

 

Patricia D. Otero, SMI Inc.

 

Note: This procedure was selected as it most closely resembled the requirements outlined by Jim Muller.

Back to Previous Page

Featured Advertisers
HOME
ABOUT US
FAQ
TESTIMONIALS
CONTACT
TECHNICAL DATA SHEET
MILITARY TESTS RESULTS
HOW TO USE
 
 

World Headquarters:

Holt International, LLC
(CAGE# 1EKS2)
42211 Garfield Road
Suite 333
Clinton Township, MI 48038
586-907-1592
800-650-6456

FAX 941-505-2689

E-mail

 

International Distributors:

United Kingdom
Kemfast Aerospace, Ltd
www.kemfast.com
sales@kemfast.com


Canada
Zaviation, Inc.
www.zaviation.net
sales@zaviation.ca

Tell A Friend! Links to our Friends Advertise with Us Resources

We encourage you to tell your friends about our site.

United Kingdom
Kemfast Aerospace, Ltd
www.kemfast.com
sales@kemfast.com


Canada
Zaviation, Inc.
www.zaviation.net
sales@zaviation.ca

Put your advertisement Here! and Get great Traffic to your site.

 

About Us | FAQ | Testimonials | Data Sheet | Contact | Site Map

Copyright 2008